ViaTerra Gear

Viaterra Grid Full Gauntlet Leather Gloves

ViaTerra Gear

Regular price Rs. 4,999.00

Bringing you the best of both worlds: race spec protection and daily use comfort. The Grid comes equipped with the same premium, top of the line KNOX SPS 404 protection used in the world’s most advanced gloves. Combine that with high density TPU protectors for knuckle and wrist, you have the best protection available for the Indian rider.


The Grid uses goatskin leather that is durable, light and naturally water resistant. It is the most comfortable leather to use in gloves due to its suppleness. We kept the thickness of the leather to the highest level possible(1.2 to 1.5mm) to ensure enhanced abrasion resistance.


Scaphoid injuries are the most common hand injury in motorcycle accidents. These are caused by the grab effect when the palm of the hand makes contact with the ground. We chose the low profile KNOX SPS 305 for the Grid is because it is small enough to not interfere during day-to-day use but at the scaphoid area. Because it is important, we worked with Knox to ensure we get the placement of the SPS absolutely correct-final production samples were physically verified at the Knox headquarters in London for approval before the production run.


On the Grid, HD TPU protectors are placed over the most critically exposed parts of the hand (the knuckles and the wrist) to better absorb impacts. Knuckle protectors are incorporated with floating panels and accordion panels to allow additional room for the movement when operating the clutch and brake. To increase the comfort, There are two layers of foam: one under the knuckle guard and the second layer that covers the back of the hand.


During a crash, Your pinky finger can encounter finger roll, causing a very painful injury. The ring and pinky fingers are stitched together in the grid to prevent this.


The Grid has an engineered super grip silicone panel attached at the purlicue(the area between forefinger and thumb) which offers much superior grip on the bars. Most other gloves have heat transfer branding detail in this area that does not significantly improve grip. You can run your finger on the grip panel to check this. Having a grippier palm allows you to hold the bars lightly while ensuring you are able to operate the throttle smoothly.


Regular leather does not register properly on touchscreen devices, making it difficult to operate your smartphone and gps units without removing the glove. The Grid has special conductive leather panels strategically placed on the index finger and thumb tips of both hands. This leather has properties that mimic a conductive path and enable operation of touch-sensitive electronic devices.


Strategically placed air inlets on the top of the fingers and perforated leather used throughout the Grid allow maximum airflow- a boon for the Indian climate.


The Grid comes with 3M reflective piping on the finger accordions for added night visibility.


Strategically placed soft viper on the left hand of the Grid helps clean the helmet visor in rainy conditions.

Touch Screen Friendly .

Things to Remember: 

  • Putting on and taking off may be slightly difficult, because the wrist area is narrowed down for safety reasons. This is done to prevent the gloves from coming off your hands during a crash and to offer a snug fit.
  • If you have never used gloves with a pinky bridge you may find it odd or uncomfortable. Give it a few days of riding and you will get used to it. Remember, any protective gear is relatively uncomfortable to wear compared to riding without any protection. 
  • You may find the Knox SPS on the palm to be uncomfortable in the first try. But just like any protective gear, over a period of time you will get used to it so you do not even notice it. These devices are incorporated in the gloves is to ensure you are well protected when you most need it.
  • In our research, we found that the palm size and the finger length are not in the same  proportion for everyone (that makes each of us unique in the truest sense!). In such cases, primary area of fitment should always be the palm area, even if you are  to be left with some extra room near your fingertips. 
  • We have used high density TPU to maximise protection and longevity. While we have added an additional foam layer underneath the TPU, they may feel a bit too hard at the beginning. Thinner and more flexible knuckle protectors are not very effective during a crash and do not last long either. 

Care Instructions:

Our gloves use full-grain goat leather that is naturally water-resistant. This means that the gloves do not get ruined if they get wet in rains. However, when leather gets wet, the oils get stripped from the leather – this will stiffen the leather and eventually cause it to crack. Think of it as your skin after taking a bath – you need to moisturize to replace the natural oils in your skin removed by the water. So, what matters for your gloves is what you do after it gets wet. 

Here is a step by step process to keep your glove well cared for and last longer.

  • If your gloves get wet, dry the gloves by pressing softly with an absorbent towel.
  • If there are stains, clean the gloves by hand with a pH neutral leather cleaner using a damp cloth or a soft-bristled brush. DO NOT USE HOT WATER
  • DO NOT allow your gloves to come in contact with solvents (do not use fabric softener!), fuel, or cleaning agents. DO NOT use any kind of CHEMICAL or ALCOHOL-BASED product for eg Hand Sanitizer.
  • Do not use a washing machine or high-pressure devices to clean the gloves, as high temperatures and pressure will damage the leather.
  • Do not place your gloves near, or let your gloves get into contact with a direct heat source – this will harden the leather and lead to damage. Also, dry the gloves indoors away from direct sunlight where there is good ventilation.
  • Just before the gloves are completely dry, put the gloves on and shape them to your hand while still damp. Remove the gloves gently, trying to retain this shape in the gloves and allow it to continue drying. 
  • After the gloves are completely dry, apply a good quality leather conditioner. This is very important. Properly treated and conditioned (oiled) leather will breathe and the internal microfibers will move freely in the leather. Use a good quality leather conditioner that will allow the leather to breathe. Apply conditioner generously and rub it into the leather. Allow the conditioner to soak into the gloves and reapply (you can do this in the sun). Wipe off any excess conditioner and make sure the gloves are not slick on the motorcycle controls.
  • Make sure that your gloves are completely dry before you store them. When gloves are stored wet or in a non-ventilated area, this may cause deformations and ruin your gloves, not to mention this allows mildew to grow on the leather causing discoloration and damage.
    Size Chart: 
    Warranty Disclaimer:
    Moto Central India offers NO WARRANTY on any products sold under Viaterra Gear.


    Related Products



    Sold Out